|
|
|
 Applications
-
packing
-
inspecting
-
painting
-
assembling
-
testing
Standard
Specifications:
-
Slats -- 5-3/4" x 10-gauge
formed slat standard, bolted to A-2 attachments on chain. Slat length
is effective conveying surface.
-
Chain & Slat Return --
Returns on angle track, supplied as part of conveyor framework.
-
Chain -- Heavy duty 6-inch
pitch with A-2 attachments on each pitch.
-
Driving Sprockets --
6-inch tooth SR 196 12-inch pitch diameter.
-
Conveyor Frame -- 7-gauge
formed channel construction, heavily cross braced. Maximum section
length 10 feet. 3-1/2" high solid guard rails both sides.
-
Drive -- Floor mounted
at discharge end of conveyor.
-
Drive Shaft -- 2-3/16"
diameter cold rolled steel.
-
Tail Shaft -- 1-15/16"
diameter cold rolled steel.
-
Take-Up -- Mounted at
tail end of conveyor for adjustment of chain tension.
-
Motor -- 1/4 HP 230/460/3/60
TEFC motor.
-
Reducer -- Heavy duty
worm gear reducer.
-
Speed -- 20 feet per
minute constant.
-
Capacity -- 400 lbs.
per foot maximum, not to exceed load capacity chart (see PDF document below)
|
For additional information
on slat conveyors, click
here to download our two-page flyer (430 kilobytes). It contains
technical data and measurements for standard designs. |
